HOOKII Neomow X Series blade set with 10 SK5 carbon steel blades

How to Maintain and Replace Blades on Your HOOKII Neomow X Series Robotic Mower

Why Blade Maintenance Matters

Sharp blades are essential for a clean, healthy lawn. Dull blades tear grass instead of cutting it, leading to brown tips and increased disease risk. For robotic mowers like the HOOKII Neomow X Series, regular blade replacement ensures consistent performance and extends the life of your mower.

Quick answer

For how to maintain and replace blades on your hookii neomow x series robotic mower, the useful question is whether the mower is still cutting cleanly. Torn grass tips, vibration, uneven color, or a rougher sound usually mean it is time to inspect the blade system instead of guessing.

What to check Why it matters
Inspect the cut Ragged tips point to dull or damaged blades.
Watch vibration A rough mower may have blade balance issues.
Replace as a set Keeps cutting consistent and safer.

Useful next reads:

This page was strengthened because it already receives organic landing-page traffic. The goal is to answer the question faster, then guide readers to the most relevant deeper guide.

HOOKII Neomow X Blade Set Overview

The official Blade Set for HOOKII Neomow X Series includes 10 single-hole blades made from SK5 carbon steel. Each blade measures 36×18×1mm and is precision-sharpened for efficient cutting.

  • Material: SK5 carbon steel – high hardness, durable, and corrosion-resistant.
  • Quantity: 10 blades per pack, enough for multiple replacements.
  • Sharpness: Factory-sharpened for clean cuts and uniform grass height.

When to Replace Blades

HOOKII recommends replacing blades every 1–2 months, depending on lawn size, grass type, and mowing frequency. Signs it’s time for a change:

  • Grass appears torn or frayed after mowing.
  • Mower struggles or leaves uneven patches.
  • Visible nicks or wear on blade edges.

How to Replace Blades on Neomow X

Replacing blades is straightforward. Follow these steps:

  1. Turn off the mower and remove the battery for safety.
  2. Flip the mower over to access the cutting deck.
  3. Unscrew the blade retaining screws (use a Phillips head screwdriver).
  4. Remove old blades and replace with new ones, ensuring the single hole aligns with the mounting pin.
  5. Tighten screws securely, but avoid overtightening.
  6. Reattach battery and test mower on a small area.

Buying Tips: Genuine vs. Third-Party Blades

Always use genuine HOOKII blades to ensure proper fit and performance. Third-party blades may vary in thickness or hole alignment, causing vibration or poor cutting. The official set is engineered for Neomow X, X LE, X Pro, and X 2 models.

Frequently Asked Questions

Can I sharpen the blades instead of replacing them?

While possible, sharpening is not recommended for SK5 blades as it may alter the balance. Replacement is safer and more effective.

How many blades come in a pack?

Each pack contains 10 blades, typically lasting 10–20 months depending on usage.

Are these blades compatible with Neomow X 2?

Yes, the blade set is compatible with all Neomow X Series models, including X 2.

What if my mower still cuts poorly after replacement?

Check for debris around the cutting deck, ensure blades are installed correctly, and verify the mower’s height adjustment is set properly.

Back to blog